Passa alle informazioni sul prodotto
1 su 1

FILA MP90 ECO XTREME

FILA MP90 ECO XTREME

Prezzo di listino Dhs. 1,165.69
Prezzo di listino Prezzo scontato Dhs. 1,165.69
In offerta Esaurito
Imposte incluse. Spese di spedizione calcolate al check-out.

EXTREME ECO-COMPATIBLE Water- and Oil-Repellent Protection

What's It For:

  • Water- and oil-repellent with a natural finish.
  • Best environmentally-friendly stain protection for porcelain tiles, natural stone, marble, and granite with polished, brushed, and matt smoothed finishes.
  • Reduces absorption without affecting the material’s natural look.
  • Ideal for grouting joints, ceramic and crackle effect surfaces, grit, resin-marble, stone slabs, colored cement tiles, and manufactured stones.
  • Provides anti-graffiti protection.

Advantages:

  1. Low VOC and Environmental Impact: Extremely low VOC and low environmental impact; Indoor Air Comfort Gold Certificate.
  2. Free of Hydrocarbon Solvents: Eco-friendly treatment.
  3. Water-Based: Withstands residual humidity conditions, can be applied 24–48 hours after the initial wash.
  4. Single-Coat Application: Apply the product and rub it gently over the surface until completely absorbed.
  5. No Surface Film, No Yellowing: Does not form a surface film and does not yellow.
  6. Ideal for Tables, Kitchen, and Bathroom Tops: Suitable for protecting tables, kitchen, and bathroom tops.
  7. Quick Drying: The surface can be walked on after just 2 hours (Application conditions: Temperature = 20°C, Humidity ≤ 60%).

Ideal For:

  • Polished Porcelain Tiles
  • Marble and Granite
  • Natural Stone and Agglomerates
  • Concrete

Method of Use:

  • No Dilution Required: Ready to use.

Application:

  1. Shake before use.
  2. For Matt Finish Materials (Natural Stone, Terracotta, Agglomerates, Cement Tiles):
    • Apply MP90 ECO XTREME evenly and continuously on a clean and dry surface using a brush or fleece pad.
    • Dab any excess product with a clean cloth before it dries.
    • On highly absorbent materials, apply two coats with a 20-minute interval.
  3. For Glossy Finish Materials (Polished Porcelain Tiles, Natural Stone, Agglomerates):
    • Apply MP90 ECO XTREME on a clean and dry surface, wetting the material and grout lines completely.
    • Before the product dries (10-15 minutes), rub it using a microfiber cloth wetted with the product.
    • Dry the surface with a clean cloth. To speed up the process, a single-disc machine can be used.
  4. Finishing (Optional):
    • On porous materials, a finishing wax can be applied depending on the material and desired effect after 4 hours.
  5. The surface can be walked on after 2 hours; water- and oil-repellent protection takes effect after 24 hours.
  6. Maintenance: Use a diluted solution of CLEANER PRO.

Coverage:

  • With One Liter of Product:
    • Polished Porcelain Tiles: 30-50 m²
    • Polished Marble/Granite: 20-30 m²
    • Matte Polished Stone: 10-20 m² (Coverage shown is indicative and refers to single coats.)

Formats:

  • 5-litre cans in boxes of 4
  • 1-litre cans in boxes of 6

Note: Before applying to the entire surface, test the product on a small area to check for color changes. Do not apply the product outdoors if rain is in the forecast. Does not protect against acid aggression.

Visualizza dettagli completi