FILA MP90 ECO XTREME

EXTREME ECO-COMPATIBLE Water- and Oil-Repellent Protection

What's It For:

• Water- and oil-repellent with a natural finish.
• Best environmentally-friendly stain protection for porcelain tiles, natural stone, marble, and granite with polished, brushed, and matt smoothed finishes.
• Reduces absorption without affecting the material’s natural look.
• Ideal for grouting joints, ceramic and crackle effect surfaces, grit, resin-marble, stone slabs, colored cement tiles, and manufactured stones.
• Provides anti-graffiti protection.

Advantages:

1. Low VOC and Environmental Impact: Extremely low VOC and low environmental impact; Indoor Air Comfort Gold Certificate.
2. Free of Hydrocarbon Solvents: Eco-friendly treatment.
3. Water-Based: Withstands residual humidity conditions, can be applied 24–48 hours after the initial wash.
4. Single-Coat Application: Apply the product and rub it gently over the surface until completely absorbed.
5. No Surface Film, No Yellowing: Does not form a surface film and does not yellow.
6. Ideal for Tables, Kitchen, and Bathroom Tops: Suitable for protecting tables, kitchen, and bathroom tops.
7. Quick Drying: The surface can be walked on after just 2 hours (Application conditions: Temperature = 20°C, Humidity ≤ 60%).

Ideal For:

• Polished Porcelain Tiles
• Marble and Granite
• Natural Stone and Agglomerates
• Concrete

Method of Use:

• No Dilution Required: Ready to use.

Application:

1. Shake before use.
2. For Matt Finish Materials (Natural Stone, Terracotta, Agglomerates, Cement Tiles):
   • Apply MP90 ECO XTREME evenly and continuously on a clean and dry surface using a brush or fleece pad.
   • Dab any excess product with a clean cloth before it dries.
   • On highly absorbent materials, apply two coats with a 20-minute interval.
3. For Glossy Finish Materials (Polished Porcelain Tiles, Natural Stone, Agglomerates):
   • Apply MP90 ECO XTREME on a clean and dry surface, wetting the material and grout lines completely.
   • Before the product dries (10-15 minutes), rub it using a microfiber cloth wetted with the product.
   • Dry the surface with a clean cloth. To speed up the process, a single-disc machine can be used.
4. Finishing (Optional):
   • On porous materials, a finishing wax can be applied depending on the material and desired effect after 4 hours.
5. The surface can be walked on after 2 hours; water- and oil-repellent protection takes effect after 24 hours.
6. Maintenance: Use a diluted solution of CLEANER PRO.

Coverage:

• With One Liter of Product:
  • Polished Porcelain Tiles: 30-50 m²
  • Polished Marble/Granite: 20-30 m²
  • Matte Polished Stone: 10-20 m² (Coverage shown is indicative and refers to single coats.)

Formats:

• 5-litre cans in boxes of 4
• 1-litre cans in boxes of 6

Note: Before applying to the entire surface, test the product on a small area to check for color changes. Do not apply the product outdoors if rain is in the forecast. Does not protect against acid aggression.